admin
2,930 Posts
Quote from admin on May 31, 2022, 10:25 pm
Can you please:
set up the drives in jbod mode
when deploying, leave the storage engine as bluestore (default)
when deploying, do not add OSDs/journals, do not choose to create any initial pools for rbd/cephfs/s3
after deployment, log in the Management UI and try to add a single OSD without cache and journal, if you have an issue please post the ceph_volume.log file
Can you please:
set up the drives in jbod mode
when deploying, leave the storage engine as bluestore (default)
when deploying, do not add OSDs/journals, do not choose to create any initial pools for rbd/cephfs/s3
after deployment, log in the Management UI and try to add a single OSD without cache and journal, if you have an issue please post the ceph_volume.log file
setantatx
7 Posts
Quote from setantatx on June 16, 2022, 11:13 am
Hi
This did the trick, thanks for your help.
Just one more thing, could you advice how much journal drive should I allocated per OSD?
Thanks!
Hi
This did the trick, thanks for your help.
Just one more thing, could you advice how much journal drive should I allocated per OSD?
Thanks!
admin
2,930 Posts
Quote from admin on June 19, 2022, 3:37 pm
Good it worked, note that i was not expecting it to work but suggested it for easier debugging, adding the OSDs in the deploy phase uses the same add functions so it should have worked from the first time.
Recommend to use 1 SSD to 4 or 5 HDDs, for nvme you could use up to 12 HDDs. The size of the allocated space on the drive is fixed at 60 GB, you can change it via config value but not recommended.
Good it worked, note that i was not expecting it to work but suggested it for easier debugging, adding the OSDs in the deploy phase uses the same add functions so it should have worked from the first time.
Recommend to use 1 SSD to 4 or 5 HDDs, for nvme you could use up to 12 HDDs. The size of the allocated space on the drive is fixed at 60 GB, you can change it via config value but not recommended.
