Forums

Home / Forums

You need to log in to create posts and topics. Login · Register

Disk SMART wrong data shown


wid
47 Posts
August 4, 2022, 9:36 am

Hi,

I would like report bug.
1) At panel serial number is: 50014ee20d97e139, but real number form disk and smartclt shows: WX11D3678PLD

2) SMART Test show: Passed, while CEPH cluster have "Possible data damage: 12 pgs inconsistent"
logs shows that system cannot read from drive
and smartctl shows "SMART overall-health self-assessment test result: PASSED" but pending sectors 7, reallocated 57

Maybe it's good idea to have PASSED, WARNING (while passed and pendings) and FAILURE.

Thank You for support 🙂
Below screens and details.

 

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD60EFRX-68L0BN1
Serial Number:    WD-WX11D3678PLD
LU WWN Device Id: 5 0014ee 20d97e139
Firmware Version: 82.00A82
User Capacity:    6,001,175,126,016 bytes [6.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5700 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Aug  4 11:35:07 2022 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection:                ( 5564) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 709) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x303d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate     0x002f   200   191   051    Pre-fail  Always       -       3
3 Spin_Up_Time            0x0027   206   197   021    Pre-fail  Always       -       8683
4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       42
5 Reallocated_Sector_Ct   0x0033   193   193   140    Pre-fail  Always       -       229
7 Seek_Error_Rate         0x002e   100   253   000    Old_age   Always       -       0
9 Power_On_Hours          0x0032   047   047   000    Old_age   Always       -       39260
10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       42
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       40
193 Load_Cycle_Count        0x0032   197   197   000    Old_age   Always       -       9511
194 Temperature_Celsius     0x0022   125   106   000    Old_age   Always       -       27
196 Reallocated_Event_Count 0x0032   144   144   000    Old_age   Always       -       56
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       7
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       4
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
1        0        0  Not_testing
2        0        0  Not_testing
3        0        0  Not_testing
4        0        0  Not_testing
5        0        0  Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

#1