Zabbix module in Luminous (1.5 or 2.0)
beastlord
2 Posts
November 9, 2017, 7:09 pmQuote from beastlord on November 9, 2017, 7:09 pmHi, admin!
The blog of the developers of Ceph (http://ceph.com/community/new-luminous-zabbix/) was mentioned about the implementation of the Zabbix module in the version of the Luminous Ceph.
Is it possible to count on the appearance of the Zabbix module in the upcoming versions of Petasan (1.5 or 2.0) ?
I apologize for my bad english.
Thank you for your product and with best wishes for success!!!
Hi, admin!
The blog of the developers of Ceph (http://ceph.com/community/new-luminous-zabbix/) was mentioned about the implementation of the Zabbix module in the version of the Luminous Ceph.
Is it possible to count on the appearance of the Zabbix module in the upcoming versions of Petasan (1.5 or 2.0) ?
I apologize for my bad english.
Thank you for your product and with best wishes for success!!!
Last edited on November 9, 2017, 9:39 pm by beastlord · #1
admin
2,930 Posts
November 10, 2017, 4:27 pmQuote from admin on November 10, 2017, 4:27 pmThanks for your post. There is no immediate plans for the short term in our roadmap but possibly later. It does look interesting
Thanks for your post. There is no immediate plans for the short term in our roadmap but possibly later. It does look interesting
beastlord
2 Posts
November 10, 2017, 4:35 pmQuote from beastlord on November 10, 2017, 4:35 pmOk. Thanks for the answer. Good luck with your development!
Ok. Thanks for the answer. Good luck with your development!
itcarmat
1 Post
January 12, 2019, 9:21 amQuote from itcarmat on January 12, 2019, 9:21 amHi at all 😉
we interested too.
Petasan Team, you are doing an awesome work 😉
Hi at all 😉
we interested too.
Petasan Team, you are doing an awesome work 😉
abierwirth
2 Posts
February 11, 2019, 5:27 pmQuote from abierwirth on February 11, 2019, 5:27 pmYou can activate the Zabbix module like in an native Ceph Cluster.
Use the Command Line and activate the Zabbix module in the ceph manager.
I run the Zabbix Module for 5 months without problems.
You get the the items below:
Ceph backfill full ratio
Ceph full ratio
Ceph nearfull ratio
Ceph OSD Apply latency Avg
Ceph OSD Apply latency Max
Ceph OSD Apply latency Min
Ceph OSD avg fill
Ceph OSD Commit latency Avg
Ceph OSD Commit latency Max
Ceph OSD Commit latency Min
Ceph OSD max fill
Ceph OSD min fill
Ceph Read bandwidth
Ceph Read operations
Ceph Write bandwidth
Ceph Write operations
Number of Monitors
Number of OSDs
Number of OSDs in state: IN
Number of OSDs in state: UP
Number of Placement Groups
Number of Placement Groups in Temporary state
Number of Pools
Overal Ceph status (numeric)
Overall Ceph status
Total bytes
Total bytes available
Total bytes used
Total number of objects
Best Regards
Andre
You can activate the Zabbix module like in an native Ceph Cluster.
Use the Command Line and activate the Zabbix module in the ceph manager.
I run the Zabbix Module for 5 months without problems.
You get the the items below:
Ceph backfill full ratio
Ceph full ratio
Ceph nearfull ratio
Ceph OSD Apply latency Avg
Ceph OSD Apply latency Max
Ceph OSD Apply latency Min
Ceph OSD avg fill
Ceph OSD Commit latency Avg
Ceph OSD Commit latency Max
Ceph OSD Commit latency Min
Ceph OSD max fill
Ceph OSD min fill
Ceph Read bandwidth
Ceph Read operations
Ceph Write bandwidth
Ceph Write operations
Number of Monitors
Number of OSDs
Number of OSDs in state: IN
Number of OSDs in state: UP
Number of Placement Groups
Number of Placement Groups in Temporary state
Number of Pools
Overal Ceph status (numeric)
Overall Ceph status
Total bytes
Total bytes available
Total bytes used
Total number of objects
Best Regards
Andre
wailer
75 Posts
December 28, 2019, 2:30 amQuote from wailer on December 28, 2019, 2:30 am+1
It would be really nice to have this functionality, or at least to be able to enable it via UI, so it matches with Petasan. Normally most environments tend to centralize monitoring in one place , instead of monitoring each one
Nice hint, and really good to know you can do it just using ceph commands. We'll try it too.
Thanks for your work!
+1
It would be really nice to have this functionality, or at least to be able to enable it via UI, so it matches with Petasan. Normally most environments tend to centralize monitoring in one place , instead of monitoring each one
Nice hint, and really good to know you can do it just using ceph commands. We'll try it too.
Thanks for your work!
Zabbix module in Luminous (1.5 or 2.0)
beastlord
2 Posts
Quote from beastlord on November 9, 2017, 7:09 pmHi, admin!
The blog of the developers of Ceph (http://ceph.com/community/new-luminous-zabbix/) was mentioned about the implementation of the Zabbix module in the version of the Luminous Ceph.
Is it possible to count on the appearance of the Zabbix module in the upcoming versions of Petasan (1.5 or 2.0) ?
I apologize for my bad english.
Thank you for your product and with best wishes for success!!!
Hi, admin!
The blog of the developers of Ceph (http://ceph.com/community/new-luminous-zabbix/) was mentioned about the implementation of the Zabbix module in the version of the Luminous Ceph.
Is it possible to count on the appearance of the Zabbix module in the upcoming versions of Petasan (1.5 or 2.0) ?
I apologize for my bad english.
Thank you for your product and with best wishes for success!!!
admin
2,930 Posts
Quote from admin on November 10, 2017, 4:27 pmThanks for your post. There is no immediate plans for the short term in our roadmap but possibly later. It does look interesting
Thanks for your post. There is no immediate plans for the short term in our roadmap but possibly later. It does look interesting
beastlord
2 Posts
Quote from beastlord on November 10, 2017, 4:35 pmOk. Thanks for the answer. Good luck with your development!
Ok. Thanks for the answer. Good luck with your development!
itcarmat
1 Post
Quote from itcarmat on January 12, 2019, 9:21 amHi at all 😉
we interested too.
Petasan Team, you are doing an awesome work 😉
Hi at all 😉
we interested too.
Petasan Team, you are doing an awesome work 😉
abierwirth
2 Posts
Quote from abierwirth on February 11, 2019, 5:27 pmYou can activate the Zabbix module like in an native Ceph Cluster.
Use the Command Line and activate the Zabbix module in the ceph manager.
I run the Zabbix Module for 5 months without problems.
You get the the items below:
Ceph backfill full ratio
Ceph full ratio
Ceph nearfull ratio
Ceph OSD Apply latency Avg
Ceph OSD Apply latency Max
Ceph OSD Apply latency Min
Ceph OSD avg fill
Ceph OSD Commit latency Avg
Ceph OSD Commit latency Max
Ceph OSD Commit latency Min
Ceph OSD max fill
Ceph OSD min fill
Ceph Read bandwidth
Ceph Read operations
Ceph Write bandwidth
Ceph Write operations
Number of Monitors
Number of OSDs
Number of OSDs in state: IN
Number of OSDs in state: UP
Number of Placement Groups
Number of Placement Groups in Temporary state
Number of Pools
Overal Ceph status (numeric)
Overall Ceph status
Total bytes
Total bytes available
Total bytes used
Total number of objectsBest Regards
Andre
You can activate the Zabbix module like in an native Ceph Cluster.
Use the Command Line and activate the Zabbix module in the ceph manager.
I run the Zabbix Module for 5 months without problems.
You get the the items below:
Ceph backfill full ratio
Ceph full ratio
Ceph nearfull ratio
Ceph OSD Apply latency Avg
Ceph OSD Apply latency Max
Ceph OSD Apply latency Min
Ceph OSD avg fill
Ceph OSD Commit latency Avg
Ceph OSD Commit latency Max
Ceph OSD Commit latency Min
Ceph OSD max fill
Ceph OSD min fill
Ceph Read bandwidth
Ceph Read operations
Ceph Write bandwidth
Ceph Write operations
Number of Monitors
Number of OSDs
Number of OSDs in state: IN
Number of OSDs in state: UP
Number of Placement Groups
Number of Placement Groups in Temporary state
Number of Pools
Overal Ceph status (numeric)
Overall Ceph status
Total bytes
Total bytes available
Total bytes used
Total number of objects
Best Regards
Andre
wailer
75 Posts
Quote from wailer on December 28, 2019, 2:30 am+1
It would be really nice to have this functionality, or at least to be able to enable it via UI, so it matches with Petasan. Normally most environments tend to centralize monitoring in one place , instead of monitoring each one
Nice hint, and really good to know you can do it just using ceph commands. We'll try it too.
Thanks for your work!
+1
It would be really nice to have this functionality, or at least to be able to enable it via UI, so it matches with Petasan. Normally most environments tend to centralize monitoring in one place , instead of monitoring each one
Nice hint, and really good to know you can do it just using ceph commands. We'll try it too.
Thanks for your work!