Servers with Two NICs.
admin
2,930 Posts
May 29, 2018, 11:55 amQuote from admin on May 29, 2018, 11:55 am1) For best practices, in is better to keep your SAN traffic separated, vmware recommendations https://storagehub.vmware.com/export_to_pdf/best-practices-for-running-vmware-vsphere-on-iscsi
section 5.1
"Best practice is to have a dedicated LAN for iSCSI traffic and not share the network with other network traffic"
the same recommendations is made by all major SAN vendors. I understand your situation and the need to use vlans, but it should be really not the first choice.
2) The following might help you to look into to add vlan support:
/opt/petasan/scripts/node_start_ips.py
/opt/petasan/config/cluster_info.json
/opt/petasan/config/node_info.json
1) For best practices, in is better to keep your SAN traffic separated, vmware recommendations https://storagehub.vmware.com/export_to_pdf/best-practices-for-running-vmware-vsphere-on-iscsi
section 5.1
"Best practice is to have a dedicated LAN for iSCSI traffic and not share the network with other network traffic"
the same recommendations is made by all major SAN vendors. I understand your situation and the need to use vlans, but it should be really not the first choice.
2) The following might help you to look into to add vlan support:
/opt/petasan/scripts/node_start_ips.py
/opt/petasan/config/cluster_info.json
/opt/petasan/config/node_info.json
Last edited on May 29, 2018, 11:56 am by admin · #21
msalem
87 Posts
May 29, 2018, 1:38 pmQuote from msalem on May 29, 2018, 1:38 pmHello admin,
Thanks for the reply, so your min setup is 2 NICs, which you can combine ISCSI, and Backend ?
What is the switch port setup you used, on both petasan and your switch?
Thanks
Hello admin,
Thanks for the reply, so your min setup is 2 NICs, which you can combine ISCSI, and Backend ?
What is the switch port setup you used, on both petasan and your switch?
Thanks
admin
2,930 Posts
May 29, 2018, 1:56 pmQuote from admin on May 29, 2018, 1:56 pmaccess mode, no port trunking. if using 2 nics/bonds you can combine mang. + iscsi 1 + backend 1 into nic1 and iscsi 2 and backend 2 into nic 2.
access mode, no port trunking. if using 2 nics/bonds you can combine mang. + iscsi 1 + backend 1 into nic1 and iscsi 2 and backend 2 into nic 2.
msalem
87 Posts
May 29, 2018, 3:02 pmQuote from msalem on May 29, 2018, 3:02 pmWe will try that in our next test and keep you posted.
Thanks
We will try that in our next test and keep you posted.
Thanks
Servers with Two NICs.
admin
2,930 Posts
Quote from admin on May 29, 2018, 11:55 am1) For best practices, in is better to keep your SAN traffic separated, vmware recommendations https://storagehub.vmware.com/export_to_pdf/best-practices-for-running-vmware-vsphere-on-iscsi
section 5.1
"Best practice is to have a dedicated LAN for iSCSI traffic and not share the network with other network traffic"
the same recommendations is made by all major SAN vendors. I understand your situation and the need to use vlans, but it should be really not the first choice.
2) The following might help you to look into to add vlan support:
/opt/petasan/scripts/node_start_ips.py
/opt/petasan/config/cluster_info.json
/opt/petasan/config/node_info.json
1) For best practices, in is better to keep your SAN traffic separated, vmware recommendations https://storagehub.vmware.com/export_to_pdf/best-practices-for-running-vmware-vsphere-on-iscsi
section 5.1
"Best practice is to have a dedicated LAN for iSCSI traffic and not share the network with other network traffic"
the same recommendations is made by all major SAN vendors. I understand your situation and the need to use vlans, but it should be really not the first choice.
2) The following might help you to look into to add vlan support:
/opt/petasan/scripts/node_start_ips.py
/opt/petasan/config/cluster_info.json
/opt/petasan/config/node_info.json
msalem
87 Posts
Quote from msalem on May 29, 2018, 1:38 pmHello admin,
Thanks for the reply, so your min setup is 2 NICs, which you can combine ISCSI, and Backend ?
What is the switch port setup you used, on both petasan and your switch?
Thanks
Hello admin,
Thanks for the reply, so your min setup is 2 NICs, which you can combine ISCSI, and Backend ?
What is the switch port setup you used, on both petasan and your switch?
Thanks
admin
2,930 Posts
Quote from admin on May 29, 2018, 1:56 pmaccess mode, no port trunking. if using 2 nics/bonds you can combine mang. + iscsi 1 + backend 1 into nic1 and iscsi 2 and backend 2 into nic 2.
access mode, no port trunking. if using 2 nics/bonds you can combine mang. + iscsi 1 + backend 1 into nic1 and iscsi 2 and backend 2 into nic 2.
msalem
87 Posts
Quote from msalem on May 29, 2018, 3:02 pmWe will try that in our next test and keep you posted.
Thanks
We will try that in our next test and keep you posted.
Thanks