Warning of full storage pool
trexman
60 Posts
March 25, 2019, 3:39 pmQuote from trexman on March 25, 2019, 3:39 pmHello,
We have 2 pools. (one large SATA and one small SSD pool). On the dashboard under storage I see the raw size of all OSDs and how much is used.
The plan over the next month is, that the SATA pool is going to be 10% filled and the SSD pool to arround 60-70%.
So I just want to make sure that I'm right.
I'm getting a warning when the used storage of the SSD pool is reaching a certain level? (also if the dashboard itself shows that the complete storage is only used by e.g. 30%)
Thanks
Hello,
We have 2 pools. (one large SATA and one small SSD pool). On the dashboard under storage I see the raw size of all OSDs and how much is used.
The plan over the next month is, that the SATA pool is going to be 10% filled and the SSD pool to arround 60-70%.
So I just want to make sure that I'm right.
I'm getting a warning when the used storage of the SSD pool is reaching a certain level? (also if the dashboard itself shows that the complete storage is only used by e.g. 30%)
Thanks
admin
2,930 Posts
March 26, 2019, 11:44 amQuote from admin on March 26, 2019, 11:44 amOn the dashboard you will get warnings that your osds are near full when they start going over 85%, and error when they reach 95%. These are the default parameters we use for
mon_osd_full_ratio = 95
mon_osd_nearfull_ratio = 85
Unfortunately if you are using email alarms, it is not something we send alarms for, ( we send for total cluster fill ratio + osds down + disk smart health ), this is something we should add in the future. so for now please rely on the dashboard warning,
On the dashboard you will get warnings that your osds are near full when they start going over 85%, and error when they reach 95%. These are the default parameters we use for
mon_osd_full_ratio = 95
mon_osd_nearfull_ratio = 85
Unfortunately if you are using email alarms, it is not something we send alarms for, ( we send for total cluster fill ratio + osds down + disk smart health ), this is something we should add in the future. so for now please rely on the dashboard warning,
Last edited on March 26, 2019, 11:45 am by admin · #2
Warning of full storage pool
trexman
60 Posts
Quote from trexman on March 25, 2019, 3:39 pmHello,
We have 2 pools. (one large SATA and one small SSD pool). On the dashboard under storage I see the raw size of all OSDs and how much is used.
The plan over the next month is, that the SATA pool is going to be 10% filled and the SSD pool to arround 60-70%.So I just want to make sure that I'm right.
I'm getting a warning when the used storage of the SSD pool is reaching a certain level? (also if the dashboard itself shows that the complete storage is only used by e.g. 30%)Thanks
Hello,
We have 2 pools. (one large SATA and one small SSD pool). On the dashboard under storage I see the raw size of all OSDs and how much is used.
The plan over the next month is, that the SATA pool is going to be 10% filled and the SSD pool to arround 60-70%.
So I just want to make sure that I'm right.
I'm getting a warning when the used storage of the SSD pool is reaching a certain level? (also if the dashboard itself shows that the complete storage is only used by e.g. 30%)
Thanks
admin
2,930 Posts
Quote from admin on March 26, 2019, 11:44 amOn the dashboard you will get warnings that your osds are near full when they start going over 85%, and error when they reach 95%. These are the default parameters we use for
mon_osd_full_ratio = 95
mon_osd_nearfull_ratio = 85Unfortunately if you are using email alarms, it is not something we send alarms for, ( we send for total cluster fill ratio + osds down + disk smart health ), this is something we should add in the future. so for now please rely on the dashboard warning,
On the dashboard you will get warnings that your osds are near full when they start going over 85%, and error when they reach 95%. These are the default parameters we use for
mon_osd_full_ratio = 95
mon_osd_nearfull_ratio = 85
Unfortunately if you are using email alarms, it is not something we send alarms for, ( we send for total cluster fill ratio + osds down + disk smart health ), this is something we should add in the future. so for now please rely on the dashboard warning,