Forums

Home / Forums

You need to log in to create posts and topics. Login · Register

node does not boot after install


povtux
2 Posts
January 10, 2020, 2:05 pm

Hi,

I try to install my first cluster for testing purposes on 3 HP Workstation Z440 with 1 SSD drive for the system and 3 1To drives per host for OSDs. I can install the node with success and when I clic reboot after install, the computer does not recognize the system disk.

I already tried to change the SATA controller settings in the BIOS but no chance for the moment.

Any idea?

#1

admin
2,930 Posts
January 10, 2020, 2:58 pm

Not sure. i would double check your bios settings dealing with boot device, also make sure you have enough ram, also maybe switch between uefi and bios boot mode (you probably need to install in the same mode you will boot from), if you have uefi secure boot, disable this + test this on more than 1 machine.  Good luck.

#2

povtux
2 Posts
January 10, 2020, 3:15 pm

Hi,

I already tried without secure boot (previously, the computer was running proxmox).

I tried to re-run rufus on the USB stick and reinstall, it worked... It's now running.

Thanks

#3